telecomanda universala 433mhz functie invatare clonare masina poarta casa garaj
Cost unic de transport la toate comenzile acestui vanzator
-
Produs:Nou, Fără garanție
-
Numar articol:206699945
-
Disponibilitate:Indisponibil
-
Preț:
40,00 Lei38,00 Lei -
Anuntul a expirat la:06.03.2022, 06:42
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Wireless Universal 433 Mhz RF Remote Control /433 Mhz EV1527 Learning code Remote Control 4 Channel For Gate Garage Door
[1] 433 Mhz EV1527 Learning code Remote Control
Technical
Parameters
1, working voltage:
DC12V 10A
2. Working
frequency: 433MHz
3, coding chip:
EV1527 (learning code)
4, the number of
buttons: 4 keys (on / off lock)
5, volume: 54.5mm
times 29.5mm times 13.8mm
Application
areas:
Remote control
switch, anti-theft alarm, remote control door lock, remote control
electric shutter door and window, wireless remote control garage
door, wireless remote control shutter, wireless remote control gate
and so on.
Tips &
Notices:
Match transmitter
type: EV1527
If your transmitters
are not using the encoding EV1527, they will not be connection
successfully
Please do not use
this remote control to clone other remote
controls,
you will lose the
built-in EV1527 encoding and this remote control will
workless.
[2] Universal 433
Mhz/315MHZ RF Remote Control
1, can copy the
chip:
Compitable for 2260,
2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012,
HT6014, SMC918 series, 527, 1527, 2240, HCS101, HCS200/HCS201,
HCS300/HCS301 (partial code), part of single chip
microcomputer
2,
clearn:
Press the ''A''
button and the ''B'' button at the same time, the LED indicator
flashes three times, release the pressed ''B'' button, the ''A''
button is not loose, click the released ''B'' button three times,
the LED indicates The light enters the fast flashing state. At this
time, the memory data is completely cleared. After the data is
cleared, the LED indicator is not lit no matter which button is
pressed.
3, the copy
method:
One hand holds the
original remote control, the other holds the remote control, and
the two remotes are as close as possible. (ideally, the two remotes
are placed on the desktop with the zero distance on the side.)
Press the desired button. The LED indicator flashes rapidly after
three flashes, and the copy is successful. The other buttons
operate in the same way. Some remote controllers have a small
transmitting power, and they should be back-to-back operated with
the original remote control and the remote control. Some operating
environments have interference, and should avoid the interference
operation. If the copying is not good, copy it again after clearing
the code. (It's especially important: the remote control on your
hand must work properly and be the same frequency as our remote
control)
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala in max. 1 zi lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.