Placa dezvoltare nodemcu ESP32-CAM cu WiFi + bluetooth + Camera OV2640
Cost unic de transport la toate comenzile acestui vanzator
-
Produs:Nou, Fără garanție
-
Numar articol:204702488
-
Disponibilitate:Indisponibil
-
Preț:90,00 Lei
-
Anuntul a expirat la:05.11.2020, 11:32
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Description:
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board
that uses PCB on-board antennas and cores based on ESP32 chips. It
can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon,
with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline
architecture, main frequency adjustment range 80MHz to 240MHz,
on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2
standards, it can be used as a master mode to build an independent
network controller, or as a slave to other host MCUs to add
networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications.
It is suitable for home smart devices, industrial wireless control,
wireless monitoring, QR wireless identification, wireless
positioning system signals and other IoT applications. It is an
ideal solution for IoT applications.
Features:
- Ultra-small 802.11b/g/n Wi-Fi
+ BT/BLE SoC module
- Low-power dual-core 32-bit
CPU for application processors
- Up to 240MHz, up to 600
DMIPS
- Built-in 520 KB SRAM,
external 4M PSRAM
- Supports interfaces such as
UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670
cameras with built-in flash
- Support for images WiFI
upload
-Support TF card
- Support multiple sleep
modes
- Embedded Lwip and
FreeRTOS
- Support STA/AP/STA+AP working
mode
- Support Smart Config/AirKiss
One-click distribution network
- Support for serial local
upgrade and remote firmware upgrade (FOTA)
- Support secondary development
- Support secondary development
Note:
This product contains the
OV2640 Camera Module. If you need to use the OV7670 camera, please
purchase it separately.
Package
Included:
1 x ESP32-CAM
Module
1 x Camera Module OV2640
2MP
Product Specifications:
ESP32-CAM Picture Output Format Rate:
Test environment: camera model: OV2640 XCLK: 20MHz, the module
transmits pictures to the computer browser by WiFi.
For more files, please click here: file
Product Specifications:
Module model | ESP32-CAM |
Package | DIP-16 |
Size | 27*40.5*4.5(±0.2)mm |
SPI Flash | default 32Mbit |
RAM | internal520KB+external 4M PSRAM |
bluetooth | bluetooth4.2BR/EDR and BLE standards |
Wi-Fi | 802.11 b/g/n/e/i |
Support interface | UART, SPI, I2C, PWM |
Support TF card | Maximum support 4G |
IO port | 9 |
Serial port rate | default 115200 bps |
Image output format | JPEG (only supported by OV2640), BMP, GRAYSCALE |
Spectrum range | 2412 ~ 2484MHz |
Antenna form | onboard PCB antenna , gain 2dBi |
Transmit power | 802.11b: 17±2 dBm (@11Mbps) 802.11g: 14±2 dBm (@54Mbps) 802.11n: 13±2 dBm (@MCS7) |
Receiving sensitivity | CCK, 1 Mbps : -90dBm CCK, 11 Mbps: -85dBm 6 Mbps (1/2 BPSK): -88dBm 54 Mbps (3/4 64-QAM): -70dBm MCS7 (65 Mbps, 72.2 Mbps): -67dBm |
Power consumption | Turn off the flash: 180mA@5V Turn on the flash and adjust the brightness to the maximum: 310mA@5V Deep-sleep: The lowest power consumption can reach 6mA@5V Moderm-sleep: up to 20mA@5V Light-sleep: up to 6.7mA@5V |
Security | WPA/WPA2/WPA2-Enterprise/WPS |
Power supply range | 5V |
Operating temperature | -20 °C ~ 85 °C |
Storage environment | -40 °C ~ 90 °C, < 90%RH |
ESP32-CAM Picture Output Format Rate:
QQVGA | QVGA | VGA | SVGA | |
JPEG | 6 | 7 | 7 | 8 |
BMP | 9 | 9 | - | - |
GRAYSCALE | 9 | 8 | - | - |
For more files, please click here: file
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala - regie in max. 2 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.