Numar articol: 179018399. Vezi produse asemanatoare.
Pune in
vanzare un produs ca acesta
GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector
Cost unic de transport la toate comenzile acestui vanzator
Disponibilitate:
In stoc
2 disponibile
Produs:
Nou, Certificat de garanție 6 luni
Politica de retur:
Acest produs poate fi returnat in 14 zile
Detalii
Plata:
- La predare
- Ramburs
- Avans
Descriere
Raporteaza produsVânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Specificatii
Product Description
GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding.
It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
Able to connect the single modules or multiple modules of the vehicle.
It can be connected with any diagnostic tool to tell whether the car communication is good or not.
It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.
It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
Able to connect the single modules or multiple modules of the vehicle.
It can be connected with any diagnostic tool to tell whether the car communication is good or not.
It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.
GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU
Connector
GODIAG GT100 Highlights:
1. ECU connection
2. OBDII Protocol Detector
3. The cable can be extended
4. Optional dedicated adater
5. Comprtible with lost of devices
6. Convert OBD1 diagnositc interface to the standard OBD2 diagnostic interface
8. Save ECU data when replacing vehicle battery.
9. BMW CAS4 Test Platform function will be coming soon, and also will develop the connection cable for Benz and Chrysler, please wait.
10. Guarantee period: One year warranty.
GODIAG GT100 Function and Operation Guide:
GODIAG GT100 Highlights:
1. ECU connection
2. OBDII Protocol Detector
3. The cable can be extended
4. Optional dedicated adater
5. Comprtible with lost of devices
6. Convert OBD1 diagnositc interface to the standard OBD2 diagnostic interface
8. Save ECU data when replacing vehicle battery.
9. BMW CAS4 Test Platform function will be coming soon, and also will develop the connection cable for Benz and Chrysler, please wait.
10. Guarantee period: One year warranty.
GODIAG GT100 Function and Operation Guide:
- By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100's LED will indicate whether the OBDII diagnostic interface has a good communication with the car.
- Monitor the voltage of vehicle OBDII interface and display
it in real time. If it is less than 11V, please stop the diagnosis
and programming to avoid the vehicle being unable to start/data
loss/module locked.
Indicator Meaning:
1. Manufacturer custom 2. SJE1850 wire 3. Manufacturer custom 4. Power grounding 5. Signal grounding 6. SAEJ2284《CAN》high 7. ISO9141-2&iso, DIS4230-4K wire 8. Manufacturer custom |
9. Manufacturer custom 10. SJE1850 wire《bus-> 11. Manufacturer custom 12. Manufacturer custom 13. Manufacturer custom 14. SAEJ2284《CAN》low 15. ISO9141-2 & ISO/DIS 4230-4L wire 16. Car battery positive |
1. OBDII Protocol Detector & communication
detection
1). Connect GODIAG GT100 to the OBDII diagnostic port of the
car.
2). When the device displays the voltage, turn on the power
switch of GODIAG GT100.
3). Then connect to the diagnostic tool, when the tool is
communicating with the car, the LED indicator of corresponding
protocol will light up or flash. ( If the CAN protocol is detected,
it will have the maximum brightness. When the communication is
successful, the corresponding CAN-H and CAN-L will dim or twinkling
weakly)
2. ECU connection: single module
connection
GODIAG GT100, connected to a single ECU module, is convenient
for a user to do the single-module diagnosis and programming.
1). Connect the ECU with the color jumpers. (If the ECU is CAN protocol, please check whether you will need to connect a 120 ohm resistor.)
2). The Godiag GT100 can be powered by connecting to the OBDII
diagnostic interface of car, or by an AC power adapter.
3). To diagnose and program for a single ECU by connecting the
diagnostic tool or ECU programmer.
3. Banana plug extension connection:
Extend the car's OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.
4. Convert OBD1 diagnostic interface to the standard OBD2
Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.
5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.
Extend the car's OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.
4. Convert OBD1 diagnostic interface to the standard OBD2
Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.
5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.
6. When to use the extension cables: The space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.
7. Able to power the car when replacing the used
battery.
1). Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car.
[Notice 1. Turn on the power switch of Godiag GT100. 2. Don't
turn on the ignition switch, don't start the car]
2). Then replace the brand-new battery B with the used battery
in the car, which will ensure that the car has fully power to
prevent data loss and audio lock-up or the malfunction due to lack
of power to the ECU control module.
8. The dedicated adapter will be released (help GT100
connect to the special ECU module)
Hardware Connection Diagram:
Godiag GT100 Parameter
Item | Specification |
Diagnostic port | OBDII |
Working voltage | DC 9V-24V |
Work and power | 0.5-0.6W |
Adapter power | Input AC100v-240v, Output DC12V 1A |
Operating temperature range | -20 to 70 °C ( -4 to 158 °F ) |
Storage temperature range | -40 to 85 °C ( -40 to 185 °F ) |
Dimension | L: 23cm, W:18cm, H:7cm |
Package includes:
1pc x Host
1pc xOBD 2-in-1 extension cable
1pc xColored jumper cable
1pc xPower supply 12V
1pc xResistance 120 ohm
6pcs xBanana plug
24pcs xWire accessories, Dupont 2.54mm connector female
pins
Modalitati de livrare si plata
LIVRARE
In Cluj-Napoca
-
- Predare personala in max. 3 zile lucratoare
-
- Prin Curier rapid - 24 Lei in max. 4 zile lucratoare
In Romania:
-
- Prin Curier rapid - 24 Lei in max. 4 zile lucratoare
PLATA
- - La predare
- - Ramburs
- - Avans
Politica de retur
- - Produsul se poate returna in maxim 14 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare
Optiunea ta
GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector