modul adaptor cc2541 ble 4.0 bluetooth serial rx tx
Cost unic de transport la toate comenzile acestui vanzator
-
Produs:Nou, Fără garanție
-
Numar articol:197835065
-
Disponibilitate:Indisponibil
-
Preț:31,00 Lei
-
Anuntul a expirat la:10.11.2020, 00:30
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Bluetooth main chip model: CC2541
Product Introduction
JDY-08 transparent transmission module is based
on the Bluetooth 4.0 protocol standard, the working frequency band
is 2.4GHZ range, the modulation mode is GFSK, the maximum
transmitting power is 0db, the maximum transmitting distance is 80
meters, adopts TICC2541 chip design, supports the user to modify
the device name through AT command , Service UUID, transmit power,
pairing password and other instructions, convenient and flexible
use.
Bluetooth full set of network disk Download:
Features
1: WeChat through (support AirSync protocol, used in micro-H5
or factory server communications, including long packet data
analysis transceiver)
2: APP transparent transmission (to support Android, IOS data
transparent)
3: iBeacon mode (support WeChat shake shake the agreement with
the Apple iBeacon protocol)
4: sensor mode (temperature, humidity, and many other sensor
data acquisition applications)
5: Host transparent mode (data transmission between modules,
the host and slave communication)
6: Host observer mode (application sensor, indoor
positioning)
7: PWM mode (applied to the motor speed, LED light brightness
adjustment)
8: IO mode (applied to mobile phone control relay or LED light
off)
9: indoor room applications (application of iBeacon data
acquisition to achieve the range of positioning)
Two technical parameters
1: The communication speed is 3K Bytes / second
2: APP transparent transmission serial port support 1024Bytes
write
3: Effective communication distance of 15 to 30 meters
4: Support PWRC pin control sleep
5: support IO port control disconnect
2 pin function description
DISC pin: used to automatically disconnect the Bluetooth
connection (the default high, low disconnect)
PWRC pin: used to wake-up sleep (the default in the sleep
state), which use this pin to ground AT command
VCC pin: for the module's power supply pin, the supply voltage
range of 3.6V to 6V
GND pin: Power ground
TXD pin: Serial output pin
RXD pin: Serial input pin
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala - regie in max. 2 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.